Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
coco:sdupdate [2024/12/05 17:44] – cxie_go-ci.comcoco:sdupdate [2024/12/13 16:20] (current) – old revision restored (2024/12/13 16:15). Removed outdated information about manual updates dsain_go-ci.com
Line 3: Line 3:
 The following procedure is applicable to the following CoCo device types: CoCo-70X, CoCo-80X, and CoCo-90X. This update method requires software version 1.3.14 or later. The following procedure is applicable to the following CoCo device types: CoCo-70X, CoCo-80X, and CoCo-90X. This update method requires software version 1.3.14 or later.
  
-**Note**: This is considered a ‘Manual Update’. Manual updates are only recommended when no internet connection is available. Updating the CoCo in this manner will delete all CSA files that are stored on the CoCo and replace them with the factory default CSAs. Please backup any CSA files you want saved. It will have no effect on signal data stored on the SD card.+===== About .bin files =====
  
-===== About bin files =====+.bin files have a certain naming convention: CoCo80X_serialNumber_yyyyMMdd.bin
  
-Bin files have a certain naming convention: CoCo80X_serialNumber_yyyyMMdd.bin+Regardless of the device type (C70X/80X/90X), the .bin file will always use the word “CoCo80X”. The extension will always be .bin. The file name should not be changed. Prior to updating, make sure that the serial number in the .bin file matches the CoCo device.
  
-Regardless of the device type (C70X/80X/90X), the bin file will always use the word “CoCo80X”. The extension will always be .bin. The file name should not be changed. Prior to updating, make sure that the serial number in the bin file matches the CoCo device.+===== Step by Step instructions =====
  
-===== Step by step instructions =====+**Place .bin file in SD card root folder**
  
-**Place bin file in SD card root folder**+Place the file in the SD card root directory, and make sure that this is the only .bin file in the directory.
  
-Place the bin file in the SD card root directory, and make sure that there is only one .bin file in this directory. +{{ coco:sdupdate:rid4.jpeg?400 |A screenshot of a computer  Description automatically generated}}
- +
-{{ coco:sdupdate:rid4.jpeg |A screenshot of a computer  Description automatically generated}}+
  
 **Log into CoCo and start update** **Log into CoCo and start update**
Line 25: Line 23:
 ==== Old Version: ==== ==== Old Version: ====
  
-{{ :sdupdate:pasted:20241205-174336.png?x400 }}+{{ :sdupdate:pasted:20241205-174336.png?400 }}
  
 ==== New Version: ==== ==== New Version: ====
  
-{{ coco:sdupdate:rid7.png?x400 |A screenshot of a computer  Description automatically generated}}+{{ coco:sdupdate:rid7.png?400 |A screenshot of a computer  Description automatically generated}}
  
 On the following screen, press the Update button (F2). Then when it asks “Retain the old CSA file?”, press “Yes/Keep” (F6)* On the following screen, press the Update button (F2). Then when it asks “Retain the old CSA file?”, press “Yes/Keep” (F6)*
  
-{{ coco:sdupdate:rid8.png?x400 |A screenshot of a computer  Description automatically generated}}+{{ coco:sdupdate:rid8.png?400 |A screenshot of a computer  Description automatically generated}}
  
 * It is recommended to choose to keep the old csa files unless the user is trying to restore the default CSAs. Press “Reset/No” to restore all CSAs to the system defaults. This will also erase all custom CSAs, so it is advised that the user backs these up prior to resetting the CSAs. * It is recommended to choose to keep the old csa files unless the user is trying to restore the default CSAs. Press “Reset/No” to restore all CSAs to the system defaults. This will also erase all custom CSAs, so it is advised that the user backs these up prior to resetting the CSAs.
  
-The device will shut down once the update is finished. To verify that the correct software version was installed, press **Setup**  **F2 (About)**. To check the software options, press **Setup** → **F2 (About)** → **F1 (Software Options)**.+The device will shut down once the update is finished. To verify that the correct software version was installed, press **Setup** > **F2 (About)**. To check the software options, press **Setup** > **F2 (About)** > **F1 (Software Options)**.