Differences

This shows you the differences between two versions of the page.

--- pa-general [2026/01/30 15:14] – [UI & Tools] reid_go-ci.com
+++ pa-general [2026/01/30 15:38] (current) – [UI & Tools] reid_go-ci.com
@@ Line 57: / Line 57: @@
 {{:picture8.png?400}}
-Make selections for block size / spectral lines to determine ∆f and dynamic range. Overlap ratio, recommended at least 50% for Hanning window. Average mode and average number should be adjusted based on testing requirements, if no direct requirements to change these settings leave as default. Applying a window to the data has a smearing effect.  Each window type has slightly different properties, Hanning is good for precisely distinguishing between different sine waves.  Flattop windows are good for identifying peaks.  The data Window selection can be left as Hanning for most testing applications; Uniform may be desired for shock or transient impulse testing.
+Make selections for block size / spectral lines to determine ∆f and dynamic range. Overlap ratio, recommended at least 50% for Hanning window. Average mode and average number should be adjusted based on testing requirements, if no direct requirements to change these settings leave as default. Applying a window to the data has a smearing effect which allows for the signal to be treated as periodic within time blocks.  Each window type has slightly different properties, Hanning is good for precisely distinguishing between different sine waves.  Flattop windows are good for identifying peaks.  The data Window selection can be left as Hanning for most testing applications; Uniform may be desired for shock or transient impulse testing.
 {{:picture9.png?400}}
@@ Line 73: / Line 73: @@
 {{:picture10.png?400}}
-During testing the options of Hold Next Frame Stop & Save will become available.  If held (paused) the continue option will be present.
+During testing the options of: Hold, Next, Frame, Stop & Save will become available.  If held (paused) the continue option will be present.
 {{::control_panel_during_test.png?400}}
-{{:picture11.png?400}}
 Processed data will display in windows and be saved to signal folders as the signal is run in real time. Save option in Control Panel will become available to user.
+{{:picture11.png?400}}