Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
vcs:controller-disconnects [2026/10/27 19:55] – cxie_go-ci.comvcs:controller-disconnects [2026/10/27 20:25] (current) – cxie_go-ci.com
Line 25: Line 25:
   - Right-click the adapter and click **Properties**.   - Right-click the adapter and click **Properties**.
   - Click the **Advanced** tab.   - Click the **Advanced** tab.
-  - For each property in the table below that is in the list, select it and set **Value** to **Disabled** (or **Off**).+  - For each property in the table below that is in the list, select it and set **Value** to **OFF**.
   - Click **OK**.   - Click **OK**.
  
Line 82: Line 82:
  
 {{controller-disconnects:pasted:20261027-194601.png}} {{controller-disconnects:pasted:20261027-194601.png}}
-The screen can still turn off manually.+The screen can still turn off. Only sleep must be **Never**.
  
 ===== Check That the Fix Worked ===== ===== Check That the Fix Worked =====
  
   - Restart the PC.   - Restart the PC.
-  - Run a test under the same conditions as the test that failed: the same adapter, dock, and USB port, the same test length, and the same lid position.+  - Run a test under the same conditions as the test that failed: the same adapter, dock, and USB port, and the same test length.
   - Do not use the PC for other work during this test.   - Do not use the PC for other work during this test.
   - Confirm that the test finished without a disconnect.   - Confirm that the test finished without a disconnect.
  
-===== Still Disconnecting? Send a Diagnostic Report =====+===== Still Disconnecting? Contact Support =====
  
-If the Spider still disconnects after you try these steps, collect a diagnostic report and send it to Crystal Instruments support at **support@go-ci.com**. If you can, also send the EDM log files (see [[general:edmlog|Sending the Tech Support Log File]]).+If the Spider still disconnects after you try these steps, email Crystal Instruments support at **support@go-ci.com**. Include: 
 + 
 +  * The date and time of the disconnect. 
 +  * The device name of the adapter that connects to the Spider. 
 +  * The EDM log files (see [[general:edmlog|Sending the Tech Support Log File]]).
  
 If you can, also try a different USB-to-Ethernet adapter or the PC's built-in Ethernet port. If you can, also try a different USB-to-Ethernet adapter or the PC's built-in Ethernet port.