Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
vcs [2025/03/06 19:26] – [FAQs] dsain_go-ci.comvcs [2026/01/26 21:44] (current) – reid_go-ci.com
Line 11: Line 11:
  
 ===== Training ===== ===== Training =====
 +
 Check out our guides to set up some of the most frequently used tests and learn some of the features and capabilities that the VCS software has to offer. Check out our guides to set up some of the most frequently used tests and learn some of the features and capabilities that the VCS software has to offer.
  
-**[[vcs:random|Random]]**\\ +**[[vcs:random|Random]]**\\  Random excitation is often used to simulate real-world vibration. The purpose of the random  vibration control system is to generate a true random drive signal such that, when the signal is applied via an amplifier/shaker to the device under test, the resulting shaker output spectrum will match the user-specified test profile. VCS also has the capability to perform Sine on Random (SoR) and Random on Random (RoR) testing.\\
-Random excitation is often used to simulate real-world vibration. The purpose of the random  +
-vibration control system is to generate a true random drive signal such that, when the signal is applied via an amplifier/shaker to the device under test, the resulting shaker output spectrum will match the user-specified test profile. VCS also has the capability to perform Sine on Random (SoR) and Random on Random (RoR) testing.\\+
  
-**[[vcs:sine|Swept Sine]]**\\ +**[[vcs:sine|Swept Sine]]**\\  Unlike Random testing which generates many frequencies at once over the band of interest, Swept Sine testing generates energy at one frequency and sweeps this frequency through a preset range. 
-Unlike Random testing which generates many frequencies at once over the band of interest, Swept Sine testing generates energy at one frequency and sweeps this frequency through a preset range.+ 
 +**[[vcs:shock|Classic Shock]]**\\  A Shock test outputs a series of pulses to excite the structure under test. The response is measured at one or more locations on the structure and a spectral analysis is used to determine its response and resonance characteristics. This pulse response approximates the impulse response, the theoretical response to an infinitely tall and narrow spike function with an area of unity.
  
-**[[vcs:shock|Classic Shock]]**\\ 
-A Shock test outputs a series of pulses to excite the structure under test. The response is measured at one or more locations on the structure and a spectral analysis is used to determine its response and resonance characteristics. This pulse response approximates the impulse response, the theoretical response to an infinitely tall and narrow spike function with an area of unity. 
 ===== FAQs ===== ===== FAQs =====
  
-Take a look at some of our helpful guides to some of the most frequently asked questions.\\ +Take a look at some of our helpful guides to some of the most frequently asked questions.\\  Don't see what you're looking for below? Send us an email at **support@go-ci.com**.
-Don't see what you're looking for below? Send us an email at **support@go-ci.com**.+
  
 [[vcs:importprofile|Importing a Profile into VCS]] [[vcs:importprofile|Importing a Profile into VCS]]
Line 36: Line 33:
  
 [[vcs:report| Report Templates]] [[vcs:report| Report Templates]]
 +
 +