Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
vds:coco-update [2026/07/23 19:52] – created reid_go-ci.comvds:coco-update [2026/07/23 20:06] (current) – reid_go-ci.com
Line 1: Line 1:
-===== CoCo Local Update =====+===== CoCo Local Update VDS =====
  
 The following procedure is applicable to all CoCo device types: CoCo-80, CoCo-70X, CoCo-80X, and CoCo-90X. The following procedure is applicable to all CoCo device types: CoCo-80, CoCo-70X, CoCo-80X, and CoCo-90X.
Line 5: Line 5:
 **Note**: Manually updates are only recommended when no internet connection is available. Updating the CoCo in this manner will delete all CSA files that are stored on the CoCo and replace them with the factory default CSAs. Please backup any CSA files you want saved. It will have no effect on signal data stored on the SD card. **Note**: Manually updates are only recommended when no internet connection is available. Updating the CoCo in this manner will delete all CSA files that are stored on the CoCo and replace them with the factory default CSAs. Please backup any CSA files you want saved. It will have no effect on signal data stored on the SD card.
  
-  - With the CoCo connected, **click Control > Update CoCo Software** or the **F5 button**.+{{ :vds:global_settings.png?600 }} \\  {{ :vds:local_coco_upload.png?600 }} \\ 
 + 
 +  - Navigate to System -> Global Settings -> Miscellaneous -> Local CoCo Upload
   - The dialog box will open, select **Browse** to locate the xxx.bin file that was sent to you.   - The dialog box will open, select **Browse** to locate the xxx.bin file that was sent to you.
   - Enter the update license number and hit the **Update** button. This update license number was also sent to you.   - Enter the update license number and hit the **Update** button. This update license number was also sent to you.
  
-{{ :localupdate:pasted:20241211-155647.png }}+{{ :vds:update_screen.png }}
  
 During the update, a message will pop up on the CoCo asking //Retain the old CSA File?// During the update, a message will pop up on the CoCo asking //Retain the old CSA File?//
Line 15: Line 17:
 Press “Yes” (or “keep” on recent versions) to keep all CSA settings the same, or press “No” (or “Reset” on newer versions) to reset all CSA settings to the default configuration. It will have no effect on saved signal data. Press “Yes” (or “keep” on recent versions) to keep all CSA settings the same, or press “No” (or “Reset” on newer versions) to reset all CSA settings to the default configuration. It will have no effect on saved signal data.
  
-Once the update process is finished, press **Close**. Finally restart the CoCo-80.+Once the update process is finished, press **Close**. Finally restart the CoCo-80X
  
 To verify that the correct software version was installed, press **Setup** > **F2 (About)**. To check the software  options, press **Setup** > **F2 (About)** > **F1 (Software Options)**. To verify that the correct software version was installed, press **Setup** > **F2 (About)**. To check the software  options, press **Setup** > **F2 (About)** > **F1 (Software Options)**.