Differences

This shows you the differences between two versions of the page.

--- dsa:acoustic [2024/05/21 14:54] – [Create Test] dsain_go-ci.com
+++ dsa:acoustic [2024/05/21 15:40] (current) – dsain_go-ci.com
@@ Line 9: / Line 9: @@
 {{:dsa:pasted:20240521-145445.png}}
 ===== Test Configuration =====
-===== Input Channels =====
+For Acoustic Analysis, there are two unique parameters that may need to be set up, //Octave Filter// and //Sound Level Meter//. Please go here for more information on basic [[dsa:fft|FFT Analysis Parameters]].\\
-===== Run Test =====
+=== Octave Filter Parameters ===
+If Octave Filters are being applied, their parameters must first be set.\\
+//Octave Resolution//- Defines the octave resolution including: 1/1, 1/3, 1/6, 1/12, and 1/24.\\
+//Low/High Frequency Band//- Defines the low and high frequency of the measurement in Hz.\\
+//Average Mode//- Defines the averaging type: exponential, linear and peak hold.\\
+//Frequency Weighting//- Defines the frequency weighting including A, B, C or Z.\\
+//Time Trace Frequency//- Defines which center band frequency, overall or frequency weighted band is used to plot time traces.\\
+//Trace Update Times//- Defines the time trace display duration. Select a larger update time to create longer time trace display duration.\\
+{{:dsa:pasted:20240521-153600.png}}\\
+=== Sound Level Meter (SLM) Parameters ===
+If the SLM is being used, the parameters must first be set.\\
+//Time Trace Type//- Defines the time weighting including L, Leq and LE.\\
+//Analysis Period//- Specifies the time duration for each analysis period.\\
+//Result Update Time(s)//- Defines how many times the result will be updated.\\
+//Result History//- Defines the measurement length of the result history.\\
+{{:dsa:pasted:20240521-153844.png}}\\