Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
vcs:recording [2024/05/08 15:56] – created dsain_go-ci.comvcs:recording [2026/03/23 22:07] (current) – prithvi_go-ci.com
Line 1: Line 1:
 ====== Recording Timestream Data ====== ====== Recording Timestream Data ======
 +
 +
 +In some cases, it is desired to record the complete time-stream data of the test. This can be done in a few different ways:
 +
 +1. Navigate to **Control > Record Time Streams**. This will initiate the raw time stream recording for all active channels + drive channel. 
 +
 +{{recording:pasted:20260323-220502.png}}
 +
 +2. On the control panel on the right, click on **“Rec”**-
 +
 +{{recording:pasted:20260323-220518.png}}
 +
 +3.    There is also a method to automatically initiate the start and stop recording entries for a test. Here is how to do this.\\  i. Go to **Setup -> Test Configuration -> Run Schedule**\\  ii. Add a **Start Recording** event to the schedule. This should be placed before the sequence that you want to record.\\  iii. Add a **Stop Recording** event at the end of the sequence that wants to be recorded.\\  {{ :vcs:pasted:20240516-151716.png }}\\ 
 +
 +When running the test, the control and any monitoring channels will now be recorded. Afterwards, this data can be downloaded and reviewed. This data will be recorded to the front-end unit (or NAS unit) and can be downloaded in EDM.
 +
 +{{recording:pasted:20260323-220613.png}}
 +