Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
vds:transfer [2024/12/20 20:03] – cxie_go-ci.comvds:transfer [2024/12/20 20:39] (current) – cxie_go-ci.com
Line 1: Line 1:
 ===== Loading and Unloading Data from CoCo ===== ===== Loading and Unloading Data from CoCo =====
- +{{:transfer:pasted:20241220-203953.png}} 
-<slider :vds:loadunloadcoco0.png> +<slider :vds:loadunload0.png> 
-<slider :vds:loadunloadcoco1.png> +<slider :vds:loadunload1.png> 
-<slider :vds:loadunloadcoco2.png> +<slider :vds:loadunload2.png> 
-<slider :vds:loadunloadcoco3.png>+<slider :vds:loadunload3.png>
 </slider> </slider>
  
-In VDS, click **Data Collector** > in the **Devices **menu, click **Load **> Click **CoCo device** > **Select **the Device you are using > Select the card name > Click **Next** > Click the **Browse **button > select the proper path > **choose the folder** **CoCo-80 > **Click **OK. ** +  - First Connect your CoCo device by ethernet to your PC. 
- +  - In VDS, click **Data Collector** > in the **Devices** menu, click **Load** > Click **CoCo device** > **Select the Device you are using** > Click **Next **> Click **Load Factories and Routes** > Click **Next**  
-To unload, follow the same steps from above after clicking the **Unload** button from the Devices menu.+  - Your VDS will have Factories and Routes to choose to upload to your CoCo device. \\ **Select options to upload >** Click** Upload >** Click** Finish**
  
 +To Unload, follow the same steps from above after clicking **Unload** from the **Devices** menu.